![background image](http://html1.mh-extra.com/html/ganz/c-allview/c-allview_installation-manual_3423022027.webp)
27
operating the camera with supplementary Infra Red lighting, to ensure
that light source and camera switch at the same time. This will prevent
the camera from hunting between colour and monochrome mode. The
drive for this should be a clean, voltfree contact, otherwise damage to the
alarm card may occur.
Alarm Masks
ALARM SETUP menu screen
An alarm mask sets the time to which an alarm is INACTIVE.
Alarm masks control the individual days of the week and pre-programmed
dates (HOLIDAYS) that an alarm is INACTIVE. By default, all alarms are
ACTIVE.
Selecting an alarm mask from the ALARM SETUP MENU takes the
operator to the ALARM MASK SETUP menu.
ALARM MASK SETUP menu screen