Gantner GAT Vending 6100 BA Installation, Configuration & Operation Download

Page: 7 / 48

GAT Vending 6100 BA
Introduction

www.gantner.com

HB_GAT-VENDING6100BA--EN_121

INTRODUCTION

1.1 About this Manual

This manual describes the mechanical installation, electrical connection, and the configuration and commissioning

of the GAT Vending 6100 BA with a vending machine. The basic operation of the GAT Vending 6100 BA for the end

user is also described.

The installation and operation of the vending machine to which the GAT Vending 6100 BA is connected is not

included in this manual. Please refer to the documentation of the respective vending machine for further information.

A description of the commands required to integrate the GAT Vending 6100 BA with custom software applications is

also available in a separate document.

1.2 Chapter Overview

Chapter "1. Introduction" contains general information about this manual and the conventions (terminology and

formatting) used therein.

Chapter "2. Device Overview" provides an overview of the GAT Vending 6100 BA. Here is a general functional

description, the intended use or application of the device and the components and accessories delivered with the

GAT Vending 6100 BA.

Chapter "3. Installation" includes instructions on how the GAT Vending 6100 BA is mounted onto a vending

machine. The installation procedure of the device in addition to the important measurement and installation

diagrams are available here.

Chapter "4". Electrical Connections" describes how the GAT Vending 6100 BA is connected electrically (data

interface, power supply) to the vending machine.

Chapter "5. Startup and Configuration" describes the startup process of the GAT Vending 6100 BA. Also available

in this section is a description of the system and configuration settings, which determine how the terminal

communicates with the network and how the terminal interacts with the user respectively.

Chapter "6. Operation" describes the general operation of the GAT Vending 6100 BA. The differences between the

various operating modes are also explained in this section.

In chapter "7. Technical Information", all the relevant technical information for the GAT Vending 6100 BA is

available.

1.3 Document Format

The following format is used in this manual to display important but not safety-critical information:

Information text Information text Information text Information text Information text Information text

Information text Information text Information text.

Summary of Contents for GAT Vending 6100 BA

















































Search results

Summary of Contents for GAT Vending 6100 BA

Reviews:

Related manuals for GAT Vending 6100 BA

Brands by name

Popular brands

Gantner GAT Vending 6100 BA, Installation, Configuration & Operation

Search results

Summary of Contents for GAT Vending 6100 BA

Reviews:

Related manuals for GAT Vending 6100 BA

Brands by name

Popular brands