GAT ECO.Side Lock 7000 BA / NW BA
Installation
18
HB_GAT-GAT-ECOSide-Lock7000-BA--EN_14
www.gantner.com
3.3 Test Installation
As the GAT ECO.Side Lock 7000 BA is suitable for a wide range of installation applications, always perform a test
installation including functional testing of the GAT ECO.Side Lock 7000 BA in a sample locker from the facility before
starting with the mass production of lockers.
The following important points must be met. Ensure that:
-
The door shackle slides centrally into the opening of the GAT ECO.Side Lock 7000 BA.
-
The door locks without any problems.
-
The door opens without resistance (ensure retaining hardware such as springs are correctly calibrated).
Also test the GAT ECO.Side Lock 7000 BA using a data carrier, ideally of the same type to be used with the locker
system, to ensure the data carrier functions as required. Once the test installation is successfully completed, the
remaining locks can be installed in the same way. An installation checklist is available from GANTNER to assist with
the test installation process.
3.4 Metallic and Non-Metallic Doors
Because the RFID field of the GAT ECO.Side Lock 7000 BA is distorted or blocked by metal, e.g., metallic locker
doors, a cutout is made in metallic locker doors into which the GAT NET.Lock Bolt Set 7200 and label carrier are
installed. A specific cutout for non-metallic doors is not necessary, only a drill hole for the status LED is required.
As the reading range of the GAT ECO.Side Lock 7000 BA is limited, the door of non-metallic lockers must not be too
thick. The maximum door thickness of non-metallic doors depends on the RFID technology and the type of data
carriers used.
3.5 Bolt Gauge
The bolt gauge (GAT NET.Lock Tool 7000, Part No. 533831) can be used to assist installation in non-metallic
doors. The gauge allows you to easily mark the drill hole positions onto the door.
Figure 3.2
– Bolt gauge (dimensions in mm)
The instructions for using the bolt gauge are included with the installation instructions for non-metallic doors (see
"3.10.2 Installation Instructions for the GAT ECO.Side Lock 7000 BA and Non-Metallic Doors").
Summary of Contents for GAT ECO.Side Lock 7000 BA
Page 63: ......