o
Place the requested weight on the surface and wait until the scale
indicates the value. Depending on the model the scale now will
show “PASS” or a new calibration-value. If a new weight is
required remove the old weight and place the new weight on the
surface, wait until it shows “PASS”
o
As soon as you see “PASS” the calibration is completed
successfully.
G&G GmbH
Novesiastr. 31
41564 Kaarst
Germany
Tel: +49 (0 21 31) 1 33 56 05
Fax: +49 (0 21 31) 1 33 56 07
Email: [email protected]
Homepage: www.gandg.de