Display:
LCD display with backlight, digit
height 10 mm
Auto power off:
After about 60sec. without
weight change
II.
Operation
o
Place the scale on a horizontal flat surface. Press [ON/OFF] key.
o
Wait until the LCD displays “0.00”.
o
Put the object(s) on the weighing platform.
III.
Tare Weighing
o
Turn on scale as described above.
o
Place the “tare item” on the platform.
o
Press the [TARE] key and wait until “0.00” is displayed.
o
Add the “net-weight-item”.
IV.
Weighing units
o
Turn on scale as described above.
o
Press the [MODE] repeatedly to change the weight unit until the
required weight unit appears
V.
Calibration
NOTE: The scale has been calibrated by the factory. For the calibration, a
preset adjustment weight is required. Without such a adjustment weight
the calibration is not possible and leads to erroneous values.
Please ask the merchant for the suitable test weights.
o
Turn on the scale by pressing the [ON/OFF] without a weight on
the scale. Wait until the display shows "0.00".
o
Press and hold the [MODE] key for 3 seconds until the display
shows "10000" (or a similar number), then release the button and
press it again. The Display will now show “CAL”.
o
After a few seconds the Display flashes "XXX g" on the display
(required adjustment weight).
