G&D VisionXS-F-DP-UHR, Installation And Operation Manual

Page: 165 / 216

Configuration
G&D VisionXS-F-DP-UHR · 53
English
Configuration
The configuration of the KVM extender can be changed either using the on-screen
display (OSD) or the web application
Config Panel
:

The
OSD
is shown on the console monitor. Most configuration settings can be
changed directly on the OSD of the console.

The web application
Config Panel
provides a graphical user interface to configure
and monitor the KVM extender via web browser.
Overview of functions and default settings
The following table provides an overview of the configurable functions of the KVM
extender. It additionally lists the
default
settings and references to detailed descrip-
tions of the functions.
Function Default setting Page
Operating modes of console modules OpenAccess 55
Renaming a console module 56
Renaming a target module 56
Changing your password 57
Selecting the language German 57
Changing hotkeys Ctrl 58
Changing the OSD key
Num
59
Opening the OSD via double keypress deactivated 60
Configuration of channel auto-switching never 61
Displaying information of channel auto-switching permanent 62
Changing the exclusive mode aktionkey print key 63
Changing the time span of the input lock 1 second 64
Right for exclusive access to the console granted 65
Changing the video mode of consoles image is always on 66
Activating a console after the permanent switch-off of the
image display
keyboard/mouse 67
Active console after starting an extender none 68
Adjusting the operating mode of the RS232 interface RS232 69
Selecting the EDID mode of the KVM extender automatic 70
Reducing the colour depth of the image data to be transmitted 24 bit 71
Freeze mode deactivated 72
Enabling or disabling DDC/CI support deactivated 73