G&D VisionXS-F-DP-UHR, Installation And Operation Manual

Page: 176 / 216

Configuration
64 · G&D VisionXS-F-DP-UHR
Changing the time span of the input lock
When carrying out keyboard or mouse inputs at a console, the KVM extender auto-
matically locks the input devices of the concurrent console. The lock is lifted if no
input is made at the active console within the adjusted timing of the input lock
(default: 1 second).
After the lock has been lifted, both users can operate the computer again.
The time span of the input lock can be adjusted between 1 and 90 seconds.
How to change the timespan of the input lock:
Related topic:

Operating the KVM extender exclusively on page 19
IMPORTANT:
The activation of the Transm. Redundancy feature, an additional SFP
transceiver and the connection to a second console module are prerequisites for this
operation option.
OSD
1. Press Ctrl+Num ( default ) to open the OSD.
2. Select the row System setup and press Enter .
3. Under Multiuser input lock enter the desired timespan of the input lock (1 to 90
seconds).
4. Press F2 to save your settings.