Installation
4
· G&D RemoteAccess-GATE
Installation
Interfaces on the front panel
HDMI Out:
Connect the monitor of the local console.
USB K/M:
Connect the USB keyboard and/or the USB mouse of the local console.
Control:
Optionally, connect an external device that you want to switch on or off
using the
RemoteAccess-GATE
.
IMPORTANT:
Only the following voltages are supported:
2 A/30 VDC
,
0.5 A/60 VDC
and
0.3 A/125 VAC
.
NOTE:
Mind the following instructions when connecting the pins:
Output connection:
Pin 1
to
Pin 3
The three pins are routed via two relays sharing a line. For this reason,
Pin 1
is
usually open and
Pin 3
is closed.
Ensure proper connection if you want to use both relays at the same time.
Supported devices: LED, buzzer, on/off button of a computer
Input connection:
Pin 4
and
Pin 5
Supported devices: external push buttons and/or binary switches
HDMI Out
USB K/M
Control
Power
Summary of Contents for RemoteAccess-GATE
Page 38: ......
Page 39: ...English...
