Introduction
4
· G&D MultiPower-12-NT
Introduction
The central power supply
MultiPower-12-NT
supplies up to twelve devices with 12 Volt.
The maximum power consumption permitted per device is 800 mA.
Use power loop cables to connect the Mini-DIN 4 sockets of up to twelve devices to
one of the Mini-DIN 4 sockets of the central power supply.
Two internal power packs ensure the redundant power supply of the
Multi-
Power-12-NT
.
The LEDs on the front and the back panel show the device’s operating status and
the load of all active devices.
The web application
Config Panel
provides a graphical user interface to monitor the
central power supply.
By default, the central power supply switches on all 12 power outlets. You can also
switch each
Power Out
socket separately via »Config Panel«, SNMP or text-based
control (see page 6).
Package contents
1 × central power supply
MultiPower-12-NT
12 × power loop cables
2 × power cable
1 × USB service cable
1 × manual
Main Power
Red. Power
Load
Service
Power
Red.
Main
Status
12VDC/800mA
Power Out 2
Status
12VDC/800mA
Power Out 3
Status
12VDC/800mA
Power Out 4
Status
12VDC/800mA
Power Out 5
Status
12VDC/800mA
Power Out 6
Status
12VDC/800mA
Power Out 7
Status
12VDC/800mA
Power Out 8
Status
12VDC/800mA
Power Out 9
Status
12VDC/800mA
Power Out 10
Status
12VDC/800mA
Power Out 11
Status
12VDC/800mA
Power Out 12
Status
12VDC/800mA
Power Out 1
Power Status
M
ULTI
P
OWER
-
12
-
NT
