Switching a »Power Out« socket
6
· G&D MultiPower-12-NT
Switching a »Power Out« socket
By default, the central power supply switches on all 12
Power Out
sockets.
However, you can also switch each
Power Out
socket separately using the »Config
Panel«, SNMP or text-based control.
Switching via »Config Panel«
How to switch a »Power Out« socket via »Config Panel«:
1. In the menu, click on
MultiPower-12-NT
.
2. Mark the central power supply you want to switch.
3. Click on
Switch
.
Now you can see a list of available
Power Out
sockets.
The current status of each socket is shown on the right.
4. Click on the
Power out
socket you want to switch.
Switching via SNMP
How to switch a »Power Out« socket via SNMP:
Set the
managed object
outletStatus
of the
Power Out
socket you want to switch via the
SNMP management station to
0
(off),
1
(on) or
2
(resetting).
Switching via text-based control
Detailed information to use XML control (see page 14 ff.) and the commands to
switch a
Power Out
socket (see page 21 ff.) is given in chapter
NOTE:
The status of the individual
Power Out
sockets (on/off) is stored and reset
when restarting the central power supply.
NOTE:
By clicking on a
Power out
socket, you can either switch it off or on.
NOTE:
The OID of the
managed object
outletStatus
is:
1.3.6.1.4.1.32828.3.1539.1.2.3.1000.1.5
