44
[49]
Placing the appliance
1. Place the product in the desired position on a flat surface.
2. Place a water level on the product.
3. The product is best placed with feet (1) to provide adequate air circulation around
the cabinet. This guarantees optimal operation of the product as well as a reducing
energy consumption. The legs can be used to level the product properly.
4. Adjust the stands (1) with 6 mm Allen wrench in the openings (2) until the product
is level
5. Tighten the screws (3) of the foot pieces (1), at the bottom, with a wrench, when
the adjusting device is not accessible from the inside.
6. Plug the openings (2) on the inside with the supplied caps
[50]
Placing the shelves
1. Place pin (a) in the opening (b) of rails.
2. Tilt the shelf support.
3. Push both sides of the shelf support
towards each other and push the shelf
support in place.
4. Place the shelf with the openings at the
back of the cabinet onto the pins of the
shelf support.
5. Lower the shelf onto/between the shelf
support at the front of the cabinet.
Summary of Contents for 000030058
Page 2: ...2 Gebruiksaanwijzing 4 Mode l emploi 20 User Manual 37 Gebrauchsanweisung 55...
Page 19: ...19...
Page 54: ...54...
