Gamatronic Electronic Industries Ltd.
User Guide
Page
1
µ
PS Series 3:3 Phase 10kVA (GEMS)
1. SAFETY PRECAUTIONS
1.1 Do’s
•
Read this manual carefully before starting installation and operation of the
UPS.
•
Review the safety precautions described below to avoid injury to users or
damaging equipment.
•
All power connections must be completed by a licensed electrician who is
experienced in wiring this type of equipment, and who is knowledgeable
about all federal, state, and local electrical codes and regulations.
Improper
wiring may cause damage to the equipment or injury to personnel.
•
Pay attention to the warning signs, labels and marks on the unit. A warning
sign signals the presence of a possibly serious, life-threatening condition.
•
Allow only qualified technicians to service the UPS. There are no user-
serviceable components.
Do not try to repair it yourself!
•
Use the UPS only for its intended purpose.
WARNING
RISK OF LETHAL ELECTRIC SHOCK.
The battery cabinet contains a
series of 12-Volt batteries that provide high voltage and energy in the
UPS body even when the UPS is not connected to the electricity
mains. Appropriate precautions should be taken during installation,
inspection and servicing.
1.2 Don’ts
•
Do not open the cover of the UPS under any circumstances. All UPS panels and
doors should be closed.
•
Do not insert any objects through the ventilation holes.
•
Do not put objects on the UPS.
•
Do not move the UPS while it is operating.
•
Do not turn the UPS upside down during transportation.
•
Do not connect or disconnect the cable to the battery cabinet before the battery
circuit breaker is turned OFF.
•
Do not turn ON the battery circuit breaker when the battery cabinet is
disconnected from the UPS.
•
Do not install next to any gas or electrical heaters. A restricted location is
recommended in order to prevent access by unauthorized personnel.
