User Guide
Gamatronic Electronic Industries Ltd.
µ
PS Series 3:3 Phase 10kVA (GEMS)
Page 28
INV
Connects the inverter within the UPS to the output, to provide power to the
load.
Note
: There is no display associated with this action.
B/P (Bypass Function Operation)
Connects the mains to the output, placing the unit in bypass mode. The unit
requires confirmation of this action. Wait approximately 2 seconds, and
confirm your selection by pressing the B/P button again.
Note
: This function overrides the UPS battery backup
4.3 Information Buttons
The UPS continually monitors its operational status. The user can view real-
time information on the LCD by pressing the appropriate information button.
Information (except for LOG and “?”) appears for approximately 10 seconds,
after which the LCD clears. Additionally, LEDs on the control panel provide
information at a glance.
The UPS maintains an event history in its log. The log can be accessed
through the information buttons or, alternatively, through the optional RS232
connection to a dedicated monitor or to a remote location via modem
communications.
Where applicable, the LCD display provides information for R, S, and T
phases and for both voltage and current.
