G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
xiv
POWER+ RM100,
3
X
208
V, User Guide, rel. 1.3
IN THE EVENT THAT SYSTEM OUTPUT CAPACITY IS INCREASED ABOVE THE
ORIGINAL FACTORY CONFIGURATION, THE SYSTEM NAMEPLATE MUST BE
UPDATED TO INDICATE THE NEW POWER AND CURRENT CAPACITY.
This condition applies when new, non-redundant power modules are added to the
system or when formerly redundant modules are designated as non-redundant.
SI LA CAPACITE DE SORTIE EST AUGMENTEE AU DELA DE LA CONFIGURATION
D'ORIGINE, LA PLAQUE INDICATIVE DU PRODUIT DOIT ETRE MISE A JOUR AVEC
LES NOUVELLES CAPACITES
.
Cette condition s'applique si de nouvelles modules onduleurs non redondantes sont
ajoutées ou si des modules onduleurs redondantes sont désignées comme non
redondantes.
S
TANDARDS AND
C
ONVENTIONS
This manual contains diagrams that include images of the LCD display screen of the UPS. Unless
otherwise indicated, the readings shown in the screen images are representational only, and are
not intended to match the readings on a specific system in a particular environment.
