UPS for 208 Vac Grid, B60US-IB Installation Guide, doc. rel. 3.0
57
The PQ Mode screen appears:
Figure 42: Enable PQ Mode
2.
Select
Enable
and then select
Confirm
.
PQ Mode is enabled.
The next step is to transfer the system from VF mode to PQ mode in 10 kW active load
increments.
3.
From the System Menu select
Operation > PQ Setup
.
4.
The
PQ Mode Setup screen
appears:
Figure 43: PQ Mode setup
5.
Select
PQ Mode
.
6.
Begin with 2kW active power by selecting 2000W from the
Active Power
slider.
7.
Select
Confirm
.
8.
Wait until the system starts in PQ mode.
9.
Navigate to the
UPS ON PQ Output
screen by selecting
Main > Status
.
The
UPS On PQ Output
status screen appears:
Summary of Contents for B60US-IB
Page 4: ......