Version 2, 16
th
March 2021, Page
2
of
9
PRE-INSTALLATION
WARNING
1) To avoid reflection problems, keep a distance of more than 300 mm
between the sink and the spout.
2) This faucet model, with an infrared sensor pointing down, is not
intended to be used together with a sink of a reflective material such as
stainless steel.
3) If a sink strainer is straight below the faucet sensor, use a strainer with
a non-reflective finish (do not use a chrome plated one).
PREPARATION FOR INSTALLATION
–
Flush the water supply lines thoroughly before installing the faucet. Do not allow dirt, thread tape or metal
particles to enter the faucet. Shut off water supply.
–
Drill 28 -29 mm of hole at desired place to install the faucet.
TOOLS REQUIRED
−
Thread tape
−
Adjustable spanner
