Revision 1
34
9/10/2019
If both switches are in the
Up
position (marked on the display board as
USB
), the analyzer
will communicate via USB. If both switches are in the
Down
position (marked on the
electronics board as RS-232, the analyzer will communicate via RS-232.
3.4.5 Open the Application Program and Set
Communication Parameters
To open the application program, double click the
GAS903
icon on the desktop (Figure 3-6).
Figure 3-6: GAS903 Software Icon
Click on the
Communications Settings button
(Figure 3-7) on the button bar of the application
program to access the
Communications Setup
dialog box window (Figure 3-8).
Figure 3-7: Communication Settings Button
Figure 3-8: Communications Setup Dialog Box (Com Port Direct)
The communications program allows the user to choose from four types of protocols, Com
Port Direct (Section 3.4.4.1), Modem (Section 3.4.4.2), Dial-up Networking (RAS) (Section
3.4.4.3) and Ethernet (TCP) (Section 3.4.4.3).
Summary of Contents for ProTech903W
