-16-
MAN
PHSR
HF
HORN
WAIL
YELP
RADIO
S1
S2
S3
S4
S5
Control Head
Off L1 L1 & L2 L1, L2, & L3
OFF L1 L2 L3
(Electrical Connections CONT’D)
(REFER TO LIGHT WIRE DIAGRAM ON NEXT PAGE, AS WELL AS
TO WIRE SIZE TABLE ON PAGE 12 FOR PROPER WIRE SIZES!)
The electrical connections for input power, slide switch outputs, and the push button
outputs are made to the control box (amplifier) using terminal blocks
(top diagram
above)
.
+12 VDC Input: C12VDC to the 3 large barrier style terminal blocks.
When controlling lights with a large amount of current (>15A) power should
be supplied to all three inputs.
L1, L2, L3 (Center Terminal Block): Connect lights to L1-L3 outputs (20A
max each) that you wish to activate in the corresponding slide switch
positions. (Note: the second slide switch position activates both L1 and L2
and the third slide switch position activates L1, L2 and L3).
S1, S2, S3, S4 (Right Terminal Block): Connect lights to S1-S4 outputs (20A
max each) that you wish to activate with corresponding pushbutton switches
S1-S4.
S5 switches power (low current - 2A or less) to the Orange wire in the wiring
harness. It has an in-line 2A fuse. Typically the horn ring transfer relay is
connected to this switch. This output may also be used to drive an external
relay when higher current is required.
LIGHT RELAY CONTROL BOX CONNECTIONS
(Amplifier box)
