-19-
Operation
GENERAL
This unit is designed for
easy operation under the
stress associated with
high-speed pursuit. Most
light and siren functions
are accessible with one
simple motion of the
slide switch.
LIGHT SLIDE SWITCH
The slide switch is designed for quick pursuit mode operation. The far left position (OFF)
will not activate any outputs.
•
Position 1
will activate the first set of lights (connected to L1).
•
Position 2
activates both the 1st and second set of lights (connected to L1 and L2).
•
Position 3
is generally used for the
FULL PURSUIT MODE
. It allows for a quick
procedure that will activate both the lights and the siren in one motion.
When the slide switch is moved to
Position 3
, the following will activate:
All three sets of lights (Connected to L1, L2 and L3 - Each output is protected
with a 20A fuse)
The siren (Wail mode)
•
Position 3:
The siren may be disabled in the pursuit mode during installation if desired.
(See page 6 of the
INSTALLER-SELECTABLE OPTIONS
section for jumper details.).
MAN
PHSR
HF
HORN
WAIL
YELP
RADIO
S1
S2
S3
S4
S5
Control Head
Off L1 L1 & L2 L1, L2, & L3
OFF L1 L2 L3
LIGHT PUSH BUTTON SWITCHES
S1, S2, S3, and S4 control the
devices connected to the
corresponding output terminals
described on pages 16-17. Press
once to activate, then press again
to deactivate.
Optionally, S3 can be set to be a
momentary switch or normally
closed
(see Light Control Option
Jumpers on pages 7-8)
.
Optionally, S4 can be set as a timed “Gun Lock” button
(see Light Control
Option Jumpers on pages 7-8)
.
S5 controls the low current device attached to the Orange wire. Typically it
is used for the Horn Ring Transfer feature (see pages 13-15 for details).
