Cleaning the TURBO nozzle B8
(pic. 17)
Cut the threads and hairs with scissors. Turn on the vacuum cleaner. The cleaner vacuums
the cut hairs and threads. In case hairs or threads got tangled up around the attachment of
the brush cylinder and cannot be removed with the above-mentioned steps, it is necessary
to remove them with a suitable tool (e.g. tweezers). At the same time, make sure no dirt
is stuck on the inner side of the nozzle (i.e. turbine). Release the two arrest latches on the
bottom side of the nozzle in the direction of the arrow and remove the cover. Clean the
space with a suitable tool (e.g. tweezers). Insert the covers back into the nozzle reversely
and close it with by folding it up (you hear an audible click).
VI. TROUBLESHOOTING
Problem
Cause
Solution
Motor won‘t start
Power supply not
connected
Check the cord, plug and the
socket
button is not switched on Push button
Lid cannot be closed -
safety lock activated
Dust filter inserted
incorrectly in the holder /
adapter
Check / repair fastening of the
cardboard front in the holder /
adapter
Suction output is not
sufficient
Regulation in MIN position
Set regulation to MAX.
Open suction
Close the hole in the hose handle
Dust filter full
Replace the filter
Clogged micro-filters
Clean or replace the micro-filters
Nozzle/ suction hose/tube or
accessories is clogged
Remove blocking objects
The cable cannot be
wound in the entire
length
Twisted cable
Straighten the cable. Take out
about 50 cm of the cable and push
again button
VII. TECHNICAL SPECIFICATIONS
Voltage (V)
specified on the type label of the appliance
Input (W)
specified on the type label of the appliance
Protection class of the appliance
II.
Weight (kg) approx.
4.2
Size of the product (mm)
390 x 285 x 220
Input in off mode is 0.00 W.
Noise level: Acoustic noise level of 80 dB(A) re 1pW
VIII. LEGISLATIVE & ECOLOGY
The manufacturer reserves the right to change the technical specifications and
accessories for the respective models.
EN
35 / 44
