background image

 User Manual 

SmartScale 300 

 

Page 6 
 

Battery charge status 

The battery icon displays in the bottom left corner of the Scale's upper 
screen. 
It is important to note that the battery icon will only ever show the 
actual amount of charge left in the battery when the Scale is turned on 
and disconnected from external power. 

Fully 
Charged 

 

Battery Icon bars are all 
displayed constantly. 

Partially 
Charged 

 

Battery Icon shows first 
four bars constantly. 

Battery Flat 

 

No Battery Icon bars are 
displayed. 

When the Scale is connected to the external power supply the battery 
icon will display the charging status. 

Charging 

 

Battery Icon shows all the 
bars constantly filling and 
then disappearing. 

Topping Up 

 

Battery Icon shows the first 
four bars constantly full and 
the remainder filling and 
then disappearing. 

Trickle 
Charge 

 

Battery Icon shows only one 
empty bar that is constantly 
travelling the length of the 
full Icon. 

 

 

Low battery warning 

When the charge remaining in the battery drops to a very low level, 
the Scale will beep and the battery charge icon will start to flash.  At 
this stage, about 15 minutes remain before the Scale shuts down. 

 

Low voltage shutdown 

When the battery charge drops to a critical level, the Scale will shut 
down.  At this stage it is necessary to recharge the battery. 

 

Summary of Contents for SmartScale 300












































Reviews: