User Manual
SmartScale 300
Page 2
Installation
Installing the Scale bracket
The bracket can be mounted on a flat vertical surface, or on a round
post.
To mount the bracket
on a flat vertical
surface, for example a
square post or board,
use the outer holes.
To mount the bracket
on a round post, use
the inner holes.
Don't mount the Scale bracket on the weighing crate or chute.
Installing the loadbars
To install the loadbars follow these steps.
1.
Bolt the platform to the loadbars.
2.
Ensure the platform is placed on a flat and level surface. Make
sure it is not touching any rails or gates.
3.
Either bolt the loadbars to the concrete pad or locate them on studs
set into the concrete. This will prevent the platform from moving
during the weighing session.
Summary of Contents for SmartScale 300
Page 1: ...SmartScale 300 User Manual Page i SmartScale 300...
Page 42: ......
