-
-
-9-
-9-
3.- TRANSPORT AND INFORMATION FOR ASSEMBLY
3.- TRANSPORT AND INFORMATION FOR ASSEMBLY
3.1.- ESTATE DELIVERY
3.1.- ESTATE DELIVERY
Before delivery, GALI starters
Before delivery, GALI starters have been examined and tested under various
have been examined and tested under various operating condition
operating conditions. The
s. The results
results
of these tests are
of these tests are recorded in a protocol.
recorded in a protocol.
All the starters are factory ready for service.
All the starters are factory ready for service.
3.2.- TRANSPORT
3.2.- TRANSPORT
The packing which they are provided with for
The packing which they are provided with for delivery facilitates transport and storage, at the same time as
delivery facilitates transport and storage, at the same time as itit
protects the starter from
protects the starter from possible blows or surface damages.
possible blows or surface damages.
The geometry of the starter is such that it is easy to
The geometry of the starter is such that it is easy to located fastening elem
located fastening elements which allow its transport or
ents which allow its transport or
lifting.
lifting.
Heavy objects. May cause muscle damage or back pain.
Heavy objects. May cause muscle damage or back pain.
Always use an adequate and proper lifting technique.
Always use an adequate and proper lifting technique.
Some heavy objects may fall and cause serious injury.
Some heavy objects may fall and cause serious injury.
Personnel should wear safety shoes.
Personnel should wear safety shoes.
3.3.- UNPACKING
3.3.- UNPACKING
Remove fully the packaging. Remove the plastics plugs that clog the holes for
Remove fully the packaging. Remove the plastics plugs that clog the holes for the inlet nozzle and air outlets
the inlet nozzle and air outlets for
for
accessories. These plugs are to prevent dirt from
accessories. These plugs are to prevent dirt from inside the starter before final assembly.
inside the starter before final assembly.
3.4.- STORAGE
3.4.- STORAGE
To prevent damage, the starters have to be
To prevent damage, the starters have to be stored in a place
stored in a place closed, protected against weathe
closed, protected against weather impact, dirt,
r impact, dirt,
dust, moisture, chemicals,
dust, moisture, chemicals, extreme temperatures and mechanical damage.
extreme temperatures and mechanical damage.
The starters leave the factory with
The starters leave the factory with anti-rust grease that protects the internal mechanisms.
anti-rust grease that protects the internal mechanisms.
Nevertheless, it is recommended to store them in a
Nevertheless, it is recommended to store them in a dry place.
dry place.
In the event of
In the event of the starter incorporating an electro valve, protect this particularly from impact. If
the starter incorporating an electro valve, protect this particularly from impact. If
the starter will r
the starter will remain dismantle
emain dismantled a long time,
d a long time, protect the pinion and output shaft of
protect the pinion and output shaft of the starter
the starter
by means of oil
by means of oil or grease to prevent rusting.
or grease to prevent rusting.
Cover the access holes to
Cover the access holes to the interior of the
the interior of the starter appropriately, avoiding the possible entry of
starter appropriately, avoiding the possible entry of
dirt or particles of
dirt or particles of any type. Take particular care with
any type. Take particular care with the caps themselves, which could
the caps themselves, which could
introduce or release loose particles into the interior.
introduce or release loose particles into the interior.
