GPS 2300 PFC BI-PULSE
25
3.5.5. ADJUSTMENT SYSTEM FOR CONVENTIONAL DC TIG WELDING MODE.
P1: SELECT PROCESS
E2: ADJUST WELDING
CURRENT I
2
(A)
D3 :
A
Note: Selection of 2S/4S is carried out in parameter setting mode.
3.5.6. ADJUSTMENT SYSTEM FOR PULSED TIG WELDING MODE.
P1: SELECT PROCESS
E1: ADJUST PULSE
FREQUENCY
E2: ADJUST WELDING
CURRENT
PULSE
D2 :
Hz
D3 :
A
Note: Selection of 2S/4S is carried out in parameter setting mode.
P5
Bleed gas. The gas solenoid valve is activated whilst depressed. The solenoid valve activation is prolonged for
two seconds after pressing.
3.5.7. PARAMETERS SETTING MODE. TIG PROCESSES
PROCESS
Setting parameters
TIG
MOD; TPR; IS; UPS; DWS; IE; TPS; REF
TIG PULSE
PULSE
MOD; TPR; IS; UPS; DCL; IB; DWS; IE; TPS; REF
3.5.7.1. ADJUSTMENT SYSTEM FOR TIG SETTING PARAMETERS.
P1: SELECT PROCESS
P1: ENTER PARAMETER
SETTING
E1: SELECT CYCLE
PARAMETER
E2: ADJUST VALUE
P1: SAVE PARAMETERS
PULSE
SETTING PARAMETERS
D2:
D3:
SAVED
PARAMETERS
3.5.7.2. SETTING PARAMETERS RESET. FACTORY PARAMETERS BY PROCESS.
PARAMETER RESET OF SELECTED PROCESS
P1+P2:
1 s
1 s
D1:
Summary of Contents for GPS 2300 PFC BI-PULSE
Page 36: ...GPS 2300 PFC BI PULSE 36 NOTES...
Page 42: ......
