Transport:
The Jack should be packed in carton. Please see the carrying position as below picture:.
CARRYING POSITION
CARRYING POSITION
Installation, operation and maintenance.
1.
Equipment installation, when Disassemble, please see (picture A/B/C/D/E/F).
2.
Air hydraulic Jack operation
a.
Operate the handle of hand valve clockwise to carry out lifting. When the Jack lifts to the rated
height then it will stop lifting automatically by itself with the limitation system.
b.
Operate the handle of hand valve anticlockwise to carry out moving down. The Jack moves
down automatically by itself with reasonable design principle of air structure.
3.
Jack maintenance
a. Add lubricating oil regularly on the air inlet every 15 days once time, the lubricating oil volume
is 5mL each time.
b. Do not use the jack in a sloped area or in bad conditions.
d. Check the oil tank to make sure whether there is enough hydraulic oil or not. Every 30 days
once time. If it is needed to add oil, pls make sure the new filled oil is compatible with the
original old oil, otherwise it will damage the hardness of machine.
c. Keep it clean daily after using, especially the outer of oil cylinder.
Warning:
1.
Air hydraulic jack is just only a lifting tool when using. It can not be used as a supporting tool.
Without any secured stands or solid supports on the suitable area under raised vehicle to assure
security, any operators are strictly prohibited to work after the equipment moved up. (Please carefully
read the label of <Warnings> which sticks to the operation rod).
2.
Use the Air hydraulic jack on a flat and resistant surface away from drains and holes. It is not allowed
to use it on a slope floor to avoid lifting objects moving or slipping, especially those vehicle. Make
sure to place some supports under the wheel to avoid slip then the Jack can be moved up or down.
(Please carefully read the label of <Warnings> which sticks to the operation rod).
3.
Always respect production requirement and use the Jack within the scope of jacking capacity. Don’t
be against the operation instruction to use it with overload.
4.
Use clean and dry air pressure. its application scope should be 8-12 bar and at the same time to apply
the filtered & clean 32# hydraulic oil. (The MAX. air pressure of safety valve is 10 bar)
Notice:
1.
Carry the Jack with hands in the (carrying position),
see picture in left side.
2.
If necessary, please use the transporting tools to move
the Jack so that will not be damaged.
3.
Please operate it according to the relative warning
indication which sticks on carton.
4.
The user can move the equipment to any places with
the help of operation rod and wheels.
3
Summary of Contents for GT4532
Page 1: ...INSTRUCTIONS FOR GT4532...
Page 25: ...GAITHER NOTES...
