![background image](http://html.mh-extra.com/html/sealey/yaj18s/yaj18s_instructions_1225359001.webp)
instructions for
air operated bottle jack 18tonne
model no:
Yaj18S
thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SafetY
9
ensure that the jack is undamaged and in good working order.
9
Keep the jack clean, particularly the load face of the saddle.
9
take immediate action to repair or replace any damaged parts.
9
use only approved parts/accessories obtained from a sealey supplier. the use of non-approved items could be dangerous and will
9
invalidate the warranty.
9
ensure that the jack is maintained by a qualified person and that the recommended hydraulic oil is used.
9
store the jack in a dry, child-proof location when not in use.
9
Keep work area clean and tidy, free from unrelated materials and well lit.
9
Keep non-essential personnel at a safe distance when using jack.
9
use the jack on solid and level surfaces only.
9
ensure that vehicle to be raised is unoccupied, that the hand brake is firmly applied and 1
st
gear is engaged (automatics in ‘Park’).
9
ensure that vehicle wheels are chocked to prevent movement in both directions.
9
check that there is sufficient space around vehicle to allow for tilting.
WarninG!
ensure that jacking the vehicle will not result in the spillage of fuel, battery acid or other dangerous substances or movement
of unrestrained items.
9
Place the jack under a specified jacking point - see vehicle hand book.
9
ensure that the jacking point is centred on the jack saddle.
9
raise the vehicle only as far as is necessary for the task in hand.
WarninG!
do not work on, or under, a vehicle which is supported only by a jack (or jacks) -
always use axle stands.
8
do not
use the jack if it is damaged.
8
do not
allow untrained persons to use the jack.
8
do not
exceed the load capacity of the jack.
8
do not
use the jack for any purpose other than that for which it is intended.
8
do not
allow anyone inside, or on, the vehicle to be jacked.
2. introduction
Powerful and reliable, ideal for workshop or roadside use. At modest cost, it takes the effort out of lifting heavy plant, tractors and commercial
vehicles. features dead man’s control and sectional pump handle for manual operation.
3. Specification
Model no: ................................................................. Yaj18S
capacity: ................................................................... 18tonne
min. height: ................................................................ 260mm
max height (including extension) ................................ 520mm
Piston stroke: ............................................................. 180mm
screw extension: .......................................................... 80mm
chassis length: .......................................................... 235mm
Width: ......................................................................... 175mm
Air consumption: ......................................................... 9.5cfm
Working pressure: ................................................ 102-145psi
Weight: ........................................................................... 17kg
refer to
instructions
YAJ18s| issue 2 07/12/16
Original Language Version
© Jack sealey limited