Gait Up SA
EPFL Innovation Park, Bat C. CH-1015 Lausanne
www.gaitup.com
TVA CHE-145.136.760
Physilog5 user manual v1.2.6 Date: 19.06.2018
Copyright © 2018, All Rights Reserved - Gait Up SA. CH-1015 Switzerland
14
longer waterproof. The forced hard reset is the ultimate way to make Physilog® responsive again, it
should only be used in desperate cases. Before you apply it, let the sensor rest for 5 minutes
(especially if the sensor is unresponsive due to a problem during a firmware update) and be sure
that the sensor is not unresponsive due to completely discharged battery.
LED indications
Situation
Description
Meaning
Connected via USB Green continuous
Fully charged
Orange blinking
Charging
Multicolor blinking
Data transfer
Red continuous
Error 1
During standalone
measurement
Green blinking
Measuring
Green continuous
Waiting for synchronization
Orange blinking
Low battery
During
measurement
started from
application
Green blinking (2 flashes per blink)
Measuring and sending data to application
Orange blinking (2 flashes per blink)
Measuring, connection to application to send
data lost
Green/orange blinking (1 green, 1 orange flash
per blink)
Measuring and sending data to application with
low battery
Error indications
2 rapid red blinks
Error 2
3 rapid red blinks
Error 3
4 rapid red blinks
Error 4
5 rapid red blinks
Error 5
6 rapid red blinks
Error 6
Troubleshoot for error indications
Error Type*
Troubleshoot
Error 1
Disconnect and replug the Physilog®
Error 2
Contact Gait Up
Error 3
Charge the Physilog®
Error 4
Contact Gait Up
Error 5
Contact Gait Up
Error 6
Empty the memory card
*see LED indication above
