Gait Up SA
EPFL Innovation Park, Bat C. CH-1015 Lausanne
www.gaitup.com
TVA CHE-145.136.760
Physilog5 user manual v1.2.6 Date: 19.06.2018
Copyright © 2018, All Rights Reserved - Gait Up SA. CH-1015 Switzerland
11
iOS
Install the “nRF Toolbox” on the iOS device
Download the latest firmware version from the email to the iOS device
Add the downloaded firmware to nRF Toolbox by connecting the iOS
device to the computer:
Open iTunes and select your phone
Select the “Apps” tab on the left and scroll down
Under “File Sharing” select the nRF
Toolbox app and add the Firmware
file to the Documents list
Click on “Done” and disconnect phone from computer
Open the nRF Connect app on the iOS device and enable Buetooth
Open DFU option of the app
Click on “Select File” and go to the tab “user files”
where you find the firmware added to the
app earlier
Shortly push the main button of the Physilog®5 to enter detection mode
Click on “Select device” button an
d look for surrounding Physilog
Select connect of one Physilog®5 sensors in the list
Plug the selected Physilog to a power source to be sure to have enough battery to perform the
update
Click on “Upload” and wait until the percentage has arrived at 100%, this may take some minutes
For firmware versions before v1.2.2 you need to do a reset of the Physilog® (hold the main
button until the LED shines orange, blinks red and then stops)
Plug the Physilog® to the computer and update the date and time (see above)
