background image

Foreword 

ILD1000A Local Desk Set

 

02/12 2 

Features and Benefits of the ILD1000A Local Desk Set 

Feature Benefit 

Selectable latching monitor 

User can select the monitor function to continue after the 

MONITOR

 

button has been released. 

Intercom 

Desk set users can communicate with each other without tying up 
valuable air time. 

Multiple parallel desk set support  Enhanced productivity and system flexibility by connecting several 

desk sets to a single radio via a junction box. 

Selectable parallel transmit audio 
mute 

Prevents feedback between desk sets in close proximity during 
transmit. 

Selectable off-hook monitor 

User can choose automatic monitor when handset is picked up. 

Selectable local speaker 

User can turn on the local speaker when the handset is picked up. 

Front panel audio mute/unmute 

Allows user to mute receive audio ‘on-the-fly.’ 

Adjustable receive input and 
transmit output level 

Allows flexibility with different radio systems and user 
environments, where radio output levels, line losses, and noise 
factors vary. 

Full-duplex capable 

Useful for full-duplex and trunking radio systems with talk and 
listen only.  See page 8 for a description of full duplex operation. 

Built-in microphone and speaker 

Allows for handset-free communication. 

 

FCC Interference Warning 

The FCC requires that manuals pertaining to Class A and Class B computing devices must contain 
warnings about possible interference with local residential radio and TV reception.  This warning reads 
as follows: 

N

OTE

:

  This equipment has been tested and found to comply with the limits for a Class A digital device, 

pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment.  This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with 
the instruction manual, may cause harmful interference to radio communications.  Operation of this 
equipment in a residential area is likely to cause harmful interference in which case the user will be 
required to correct the interference at his own expense. 

Summary of Contents for ILD1000A

































Reviews: