26
ENGLISH
3 - SAFETY ADVICE
The machine is to be used solely by adults who have carefully read
and fully understood this manual and all the safety advice contained
in the same.
The user is responsible in relation to third parties in the working
area.
The installer, user and maintenance technician are obliged to notify
the constructor of any defects or faults which may effect the original
safety of the system.
Installation must be effected solely by authorized and qualified per-
sonnel.
The machine is to be used solely in the presence of suitable lighting.
For safety reasons, all worn or damaged parts must be promptly
replaced.
Regularly check that the power supply cable is in good conditions.
Damaged cables must never be repaired using insulating tape or
clamps.
If the power supply cable is damaged, it must be replaced by the ma-
nufacturer or by its technical assistance dept. or anyway by a similarly
qualified person so to prevent any possible hazard.
Do not expose the machine to the elements (sun, rain , etc).
Prolonged machine standstill at temperatures of under 0°C (zero
degrees centigrade), may cause serious damage or breakage to the
boiler piping: it is therefore necessary to completely empty the water
circuit before every prolonged standstill.
The removal of guard and/or safety elements fitted on the machine
is forbidden.
The packaging components must be consigned to special disposal
centres and must in any event never be left unguarded or within reach
of children, animals or non-authorized persons.
The constructor declines responsibility for any damage to things, per-
sons or animals caused by eventual interventions on the machine by
personnel not specifically authorized to undertake such operations.
In the event of any non-authorized interventions or repairs on the machi-
ne, or in the event of the use of non-original spares all guarantee terms
become void, and the company reserves the right to reject validity.
The user must comply with the current safety laws in force in the country
of installation, as well as common sense and ensure that all maintenance
operations are regularly carried out.
Never clean the inside of the machine with power supply on and
plug connected and in any event avoid the use of water sprays or
detergents.
The user must not touch the machine if his hands or feet are wet or damp,
neither must be use the machine in bare feet. Although the machine is
earthed it is advisable to use wooden platforms or a cut-out box com-
plying with local laws in order to prevent the risk of electrocution.
Do not touch the coffee spouts and the hot water and steam nozzles
with your hands or any other parts of the body as the liquids or steam
issuing from them are very hot and may cause burns.
Avoid operating the machine without water.
Clogging may cause the generation of sudden liquid or steam jets with
serious consequences. Therefore keep the water as clean as possible
using filters and water softeners.
The cups and small coffee cups must be thoroughly dried before placed
on the relative surface.
