34
English
Error Code Key
The list below reports the error codes that the display can show, their meanings
and how to solve the problem. If the indicated solutions are ineffective because
the display keeps showing the error code icon and the machine does not function
correctly, or if further error codes are displayed, please contact an authorised
service centre or your local vendor.
The contact info is listed on www.gaggia.com and www.gaggia.it.
Error code
Problem
Cause
Possible solution
01
The coffee grinder is
clogged.
The coffee outlet duct
is clogged.
Remove the power cord and remove the
brew group. Clean the coffee outlet duct
thoroughly using a spoon handle. Switch
the appliance on again.
03 - 04
A problem occurred in the
brew group.
The brew group is dirty
or not well lubricated.
Switch off the machine using the power
button. Remove the brew group and clean
it thoroughly. (Refer to the "Cleaning the
Brew Group" chapter)
The brew group is not
positioned correctly.
Switch off the machine using the power
button. Remove the brew group and
reinsert it. Ensure that the brew group is
in the correct position before inserting it.
Refer to the "Reinserting the brew group"
chapter.
05
A problem occurred in the
water circuit.
There is air in the water
circuit.
Remove and reinsert the tank in the
machine a couple of times. Make sure you
insert the tank correctly in the machine.
Check that the water tank seat is clean.
If you use an "" filter: pull out the
filter from the water tank and shake it to
remove all air from the filter. Then reinsert
the "" filter into the water tank.
14
The machine is
overheated.
There may be multiple
causes.
Switch off the machine and switch it
on again after 30 minutes. Perform this
operation 2 or 3 times.
START/STOP
ON/OFF
my favourites
HOME
clean/setting
x
x
4219-450-08051 MANUAL GAG. CAD. MILK EN-FR 120US Rev 01.indd 34
09/10/2020 16:23:06
