27
Operating Instructions
en-us
OPERATING INSTRUCTIONS
Operating Instructions
9
WARNING
To reduce the risk of fire, electric shock, or injury
to persons, read the IMPORTANT SAFETY
INSTRUCTIONS and OPERATING
INSTRUCTIONS before operating this appliance.
Before using the washer for the first
time
Check to make sure your washer has been installed
properly by following the installation instructions in this
manual.
Check the machine. Never connect the utilities (power or
water) to or start a damaged machine! Contact Customer
Service!
Check to be sure your household electrical system
voltage and the voltage specifications on the washing
machine rating plate correspond.
Check to be sure the washer hot and cold water supply
taps are turned on.
Turning the washing machine on and off
Center of the program selector is pressed to turn the
appliance on or off.
Before loading your first load of laundry
Your new washing machine was tested before leaving the
factory. This process involves running various wash
cycles. As a result, a small amount of water may remain in
the tub and drainage system. Run a
DRUM CLEAN
cycle
with no laundry to clean the system before your first load
of laundry.
First add 1 to 2 tablespoons of detergent to the main-
wash chamber II. Then run the
DRUM CLEAN
cycle.
Wait for the cycle to finish.
Using the program selector to choose a
wash program
NOTICE
If the Child lock is activated, you must deactivate it
before you can select a program.
Use the program selector to select the desired wash
program. The dial turns in both directions and when a
cycle is selected its time duration appears in the display.
The related preset options (temperature, spin speed,
etc.) lights are activated.
Selecting optional program settings
By selecting the optional program settings, you can
adjust the washing process to better suit the items you
are washing.
The optional program settings can be selected and/or
deselected depending if they are allowed (not all settings
are allowed for all programs) and the cycle’s progress.
The indicator lamps of the buttons light up if the setting
is active.
