34
en-us
Home Connect ™
5.
Press
A
(Start/Pause) to confirm.
“Ÿš
(end) will appear on the display. The network
settings have now been reset. Your appliance is no
longer connected to your home network or the
Home Connect app.
6.
Press
ý
(Remote Start)
briefly to exit the Home
Connect settings.
Notes
▯
If the network settings could not be reset,
“§§
(fault)
will appear on the display.
▯
If you want to operate the appliance via the
Home Connect app again, you will need to reconnect
it to your home network and to the
Home Connect™ app either automatically or manually.
Updating the software
You can update the Home Connect software on your
appliance. As soon as a new update is available,
—˜š
(update) will appear on the display.
You can install the update directly via the message on the
display or, alternatively, you can do this manually.
1.
Switch the appliance on.
2.
Press and hold
ý
(Remote Start)
for at least
3 seconds.
‘ž£
(connect automatically) will appear on the
display.
3.
Turn the program selector to position 6.
—˜š
(update) will appear on the display.
A
(Start/Pause) will flash if a software update is
available.
4.
Press
A
(Start/Pause) .
¢“à
(yes) will appear on the display.
5.
Press
A
(Start/Pause) to confirm.
Update installation will now start. This process may take
several minutes. Do not switch the appliance off while
updates are being installed.
6.
Press
ý
(Remote Start)
briefly to exit the Home
Connect settings.
Information on data protection
When your appliance is connected to a WLAN network
that is connected to the Internet for the first time, your
appliance transmits the following categories of data to
the Home Connect™ server (initial registration):
▯
Unique appliance identification (consisting of
appliance codes as well as the MAC address of the
installed WiFi communication module).
▯
Security certificate of the WiFi communication module
(to ensure a secure data connection).
▯
The current software and hardware version of your
domestic appliance.
▯
Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Note:
Home Connect functions can be used only in
conjunction with the Home Connect app. Information on
data protection can be accessed in the Home Connect
app.
Declaration of Conformity
BSH Home Appliances Group hereby declares that the
appliance which features Home Connect functionality is
in accordance with the essential requirements and other
relevant provisions of the following Directives.
