43
Appliance settings
en-us
Appliance settings
Appliance settings
¯
3 sec. (Child lock)
You can secure the appliance against inadvertent
changing of the set functions. To do this, activate the
Child lock after cycle start.
To
Activate/Deactivate
, press
6
(Finish in)
M
and
N
for
approximately 3 seconds. In the display field, you will see
the
D
symbol light indicating the Child lock is active.
NOTICE
The Child lock will remain activated after the end of the
cycle and the door will remain locked. Even switching the
appliance off and on will keep the door locked and will
not deactivate the Child lock. You must deactivate Child
lock and, if necessary, activate it again.
Activating setting mode
In order to change the default appliance settings
described below, you will first need to enter or activate
setting mode.
To enter or activate the setting mode:
1.
Switch on the appliance. The indicator lamp of the
program on position 1 (
(
) lights up.
2.
Press and hold
q
(Temperature)
button and, at the
same time, turn the program selector to position
2 (
0
).
3.
Release
q
(Temperature)
button.
The setting mode is now activated.
Changing the audible signal volume
You can adjust the volume of audible notification signals
(that indicate that a program has ended, for example) and
audible button signals by turning the program selector to
the following positions:
▯
2 (
0
): Audible notification signal volume
selectable values:
‹
= off,
‚
= quiet,
ƒ
= medium,
„
= loud,
…
= very loud
▯
3 (
8
): Audible button signal volume
selectable values:
‹
= off,
‚
= quiet,
ƒ
= medium,
„
= loud,
…
= very loud
1.
Turn the program selector to the required position.
2.
Use the
6
(Finish in)
N
or
M
button to set the volume
you require (
‹
= off;
…
= very loud).
Switching the automatic switch-off function on/off
If the appliance is not used for an extended period, it may
automatically switch itself off until a program starts or
when a program has ended in order to save energy. It can
be switched back on again at any time by pressing the
power button
#
.
You can switch the appliance's automatic switch-off
function on or off as follows:
1.
Turn the program selector to position 4 (
@
).
2.
Use the
6
(Finish in)
N
or
M
button to switch the
appliance's automatic switch-off function on (
‹Ÿ
) or
off (
‹””
).
NOTICE
The automatic switch-off function cannot be activated
if Wi-Fi is activated.
Switching the Drum Clean reminder on/off
A reminder to clean the drum is indicated by a light
adjacent to the
DRUM CLEAN
program. In order to switch
the drum clean reminder on (or off, if desired):
1.
Turn the program selector to position 5 (
H
).
2.
Use the
6
(Finish in)
N
or
M
button to switch the
drum clean reminder on (
‹Ÿ
) or off (
‹””
).
#
+
