Preparing the cabinet
• Cut out the recess for one or several Vario
appliances in your worktop. Proceed as indicated
on the installation sketch. The installation sketch
contains the measurements of the space required
for the trim between the appliances. Several
appliances can also be installed in individual
recesses, as long as a minimum clearance of
50 mm is kept to between the appliances.
• As shown in the installation sketch, drill the
Ø 35 mm holes to secure the control knobs in the
cabinet front.
• If the cabinet front is thicker than 26 mm, the front
must be routed from the back to max. 26 mm on
an area of 80 x 310 mm.
15
**530 mit Deckelscharnier
270
8
380
510*
*
490
1575
1170
765
360
min. 3
5
min.
50
515
90
35
60
72
280
76
220
min.1
05
max
.162
,5
D > 26
D = 26
80 x
310
min. 5
16 – 26
min. 5
** 530 with appliance cover hinge
