18
Additional options
Additional options
* depending on model
Additional options can be set with the buttons
H
.
¥
Power *
Power
The "Power" function can reduce the run time by
approx. 20% to 66% depending on the rinse
programme selected. To obtain optimum cleaning and
drying results with a reduced run time, water and
energy consumption are increased.
Half load
§
Half load *
If you have only a few items to wash (e.g. glasses,
cups, plates), you can switch to “half load”. This will
save water, energy and time. It is recommended to put
a little less detergent in the detergent dispenser than
for a full load.
μ
HygienePlus *
HygienePlus
This function increases the temperatures and retains
them for an extra long time to obtain a defined
disinfection performance. Continuous use of this
function increases the hygiene status. This additional
option is ideal for cleaning e.g. chopping boards and
baby bottles.
Ï
intensive *
Intensive
Perfect for a mixed load. You can wash very soiled
pots and pans in the lower basket together with
normally soiled utensils in the upper basket. The spray
pressure in the lower basket is intensified, the rinsing
temperature is increased slightly.
½
extraDry *
extraDry
An increased temperature during the final rinse
and an extended drying phase ensure that even plastic
parts dry better. There is a slight increase in the
energy consumption.
Operating the appliance
Programme data
The programme data (consumption values) can be
found in the summary of instructions. They refer to
normal conditions and the water hardness set value
•
:
‹…
. Different influencing factors such as e.g. water
temperature or line pressure may result in deviations.
Aqua sensor
Aqua sensor *
* depending on model
The Aqua sensor is an optical measuring device (light
barrier) which measures the turbidity of the rinsing
water.
The Aqua sensor is used according to the programme.
If the Aqua sensor is active, “clean” rinsing water can
be transferred to the next rinse bath and water
consumption can be reduced by 3–6 litres. If the
turbidity is greater, the water is drained and is
replaced with fresh water. In the automatic
programmes the temperature and running time can
also be adjusted to the degree of soiling.
Switching on the appliance
1
Turn on the tap fully.
2
Switch on ON/OFF switch
(
.
The display of the last selected programme
flashes. This programme remains selected if no
other programme button
0
is pressed. The
expected programme duration flashes on the
digital display
)"
.
3
Press the START button
P
.
The programme starts running.
