33
Installation and connection
Removing the appliance
Also obser ve the sequence of worksteps here.
1
Disconnect the appliance from the power supply.
2
Turn off the water supply.
3
Disconnect the waste water and fresh water
connections.
4
Loosen fastening screws for the furniture par ts.
5
If fitted, remove the base panel.
6
Pull out the appliance, carefully pulling the hose
behind.
Transportation
Empty the dishwasher and secure loose par ts.
Drain the appliance according to the following
steps:
1
Turn on the tap.
2
Open the door.
3
Switch on ON/OFF switch
(
.
4
Select programme with the highest temperature.
The expected programme duration is indicated on
the numerical display
8
.
5
Press START button
)"
.
6
Close the door.
Programme sequence star ts.
7
Open door after approx. 4 minutes.
8
Press START button
)"
until
‹
:
‹‚
is indicated
on the digital display.
9
Close the door.
10
Open door after approx. 1 minute.
The numerical display indicates
‹
:
‹‹
.
11
Switch off ON/OFF switch
(
.
12
Turn off the tap, disconnect supply hose and
drain water.
Transport appliance upright only.
(This prevents residual water from running into the
machine control and damaging the programme
sequence.)
