19
Operating the appliance
Optical display while theprogramme isrunning
Optical display while the programme
is running *
* depending on model
While the programme is running, a light spot
shines on the floor under the appliance door. Do not
open the dishwasher door until the light point is no
longer visible on the floor.
If the door is not completely closed, the light spot
flashes. *
If the appliance is installed at eye-level, with flush
furniture front, the light point is not visible.
This function can be changed as follows:
1
Open the door.
2
Switch on ON/OFF switch
(
.
3
Hold down programme button
#
and press
START button
)"
until
•
:
‹
....
is indicated on the digital display.
4
Release both buttons.
The LED for button
#
flashes and the digital
display
8
displays the factor y setting
•
:
‹…
.
5
Press programme button
#
until the factor y set
value
‚
:
‹‚
is indicated on the digital
display
8
.
To change the setting:
1
By pressing the button
3
, you can switch
the function off
‚
:
‹‹
or on
‚
:
‹‚
.
2
Press START button
)"
.
The set value is saved.
3
Close the door.
Remaining running time display
When the programme is selected, the remaining
running time of the programme is indicated on the
digital display
8
.
The running time is determined during the programme
by the water temperature, the number of utensils as
well as the degree of soiling and may var y (depending
on the selected programme).
Timer programming
You can delay the star t of the programme in 1 hour
steps up to 24 hours.
1
Open the door.
2
Switch on ON/OFF switch
(
.
3
Press the button
`
+ until
‹‚
is flaching in the
timer programming display
X
.
4
Press + or – button until the
`
displayed time
corresponds with your requirements.
5
Press START button
)"
, timer programming is
activated.
6
To delete timer programming
`
, press
the + or – button until
‹‹
is indicated on the
digital display
X
.
You can change your programme selection at any
time until the programme star ts.
7
Close the door.
