Gaggenau CX 491 610, Use And Care Manual

Page: 20 / 68

20
Warnings
Warnings are displayed if an error occurs within the
appliance which means you can only continue to use
the cooktop with limitations. Follow the instructions
on the display and touch the
G
display area to close
the warning.
Notes
‒ Warnings are displayed with a red line.
‒ For some warnings, an error code is displayed
(e.g.: [C3])
If necessary, specify the error code when you contact
the after-sales service.
Error messages
Error messages are displayed if errors or malfunctions
occur within the appliance with the result that you
cannot continue to use the cooktop.
Disconnect the appliance from the power supply. Wait
a few seconds and reconnect it. If the display appears
again, call the after-sales service.
Note: For some error messages, an error code is
displayed (e.g.: [C0])
If necessary, specify the error code when you contact
the after-sales service.
Tips
5HVWULFWHGIXQFWLRQV
<RXFDQFRRNZLWKUHVWULFWHGIXQFWLRQV
,IWKHSUREOHPSHUVLVWVVZLWFKWKHDSSOLDQFHRIIDQG
RQDJDLQDWWKHKRXVHIXVHRUFLUFXLWEUHDNHULQWKH
IXVHER[&DOOWKHDIWHUVDOHVVHUYLFHDVVRRQDV
WKHGLVSOD\DSSHDUVDJDLQ
>&@
6\VWHPHUURU
'LVFRQQHFWWKHKREIURPWKHSRZHUVXSSO\
:DLWDIHZVHFRQGVDQGUHFRQQHFWLWDJDLQ
,IWKHGLVSOD\GRHVQRWJRRXWFDOOWKH
DIWHUVDOHVVHUYLFH
>&@
Problem Remedy
The size or shape of the cookware is not displayed correctly
on the Touch display. Differences in how the cookware is shown on the display are
normal and do not adversely affect the correct operation of
the cooktop (particularly small cookware is shown as a round
hotplate).
Two hotplates that are quite close to each other may be dis-
played as one hotplate. Redistribute the cookware.
Never place the cookware outside of the usable cooking sur-
face.
The hotplate power level cannot be increased. The overall output of the cooktop has been limited. Adjust the
overall output under “
Power management
” in the Options
menu.
Very large cookware may affect the maximum power level of
other hotplates on the same half of the cooktop. Redistribute
the cookware.
The booster function has been deactivated or cannot be acti-
vated. You can only activate the booster function once on the right
and left-hand halves of the cooktop. If a second hotplate is
switched on or is already in operation, the booster function
will not be available or is deactivated and the hotplate returns
to power level
9.0
.
The overall output of the cooktop has been limited. Adapt the
overall output under “
Power management
” in the Options
menu.
An audible signal sounds if there is an object on the touch
display. Remove the object and acknowledge the indicator on the dis-
play. You can now reset the cooktop.