en
Home Connect
34
4.
Press repeatedly until the required function is dis-
played.
5.
Use the twist knob to select the required setting.
6.
Press and hold for at least 4 seconds.
a
The settings are saved.
7.
"Exiting the basic settings menu", Page 34
24.3 Exiting the basic settings menu
▶
Switch off the hob using the main switch.
Home Connect
25 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tip:
Please also follow the instructions in the
Home Connect app.
Notes
¡
Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→
¡
Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡
In networked standby mode, the appliance requires
a maximum of 2 W.
¡
Hobs are not designed to be left unattended. Al-
ways monitor the cooking process.
25.1 Setting up the Home Connect app
1.
Install the Home Connect app on your mobile
device.
2.
Start the Home Connect app and set up access for
Home Connect.
The Home Connect app guides you through the en-
tire login process.
25.2 Setting up Home Connect
Requirements
¡
The appliance is connected to the power supply and
is switched on.
¡
You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡
The Home Connect app has been installed on your
mobile device.
¡
The appliance is receiving signals from the WLAN
home network (Wi-Fi) at its installation location.
¡
The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
1.
Open the Home Connect app and scan the follow-
ing QR code.
2.
Follow the instructions in the Home Connect app.
25.3 Changing the Home Connect settings
1.
Switch on the hob.
2.
Press within the next 10 seconds.
The displays show the product information.
Product information
Display
Customer service index
(CSI)
Production number
Production number 1
.
Production number 2
.
3.
Press again.
a
The basic settings menu is opened.
a
and
light up.
4.
Press repeatedly until is displayed.
5.
To change a Home Connect setting, press re-
peatedly until the required setting is displayed.
→
"Overview of the Home Connect settings",
6.
Use the twist knob to select the required value for
the setting.
