Home Connect
en
35
7.
Press and hold for at least 4 seconds.
a
The settings are saved.
8.
"Exiting the basic settings menu", Page 34
25.4 Overview of the Home Connect settings
You can adjust the settings and network settings for Home Connect by going to your hob's basic settings.
Setting
Selection or display
Additional information
/
Registration in the home network (WiFi)
– Not connected/disconnect net-
work
– Connect automatically
– Connect manually
– Connected
Log the hob on in the WiFi home network (WiFi) or dis-
connect from the network.
/
Connection to app
– Not connected or login pro-
cess complete
– Connect
/
is only displayed if the hob is connected to the
home network.
/
Connect to home network (WiFi)
– Wireless module switched off
– Wireless module switched on
If WiFi has been activated, you can use the Home Con-
nect functions.
/
is only displayed if the hob has been previ-
ously connected to a network.
/
Configure settings via app
– Switched off
– Switched on
1
If the setting is switched off, only the hob's operating
statuses are displayed in the Home Connect app.
/
Software update
– Update available and ready to
install
– Start installation
/
is only displayed if a software update is avail-
able.
/
Remote access by customer service
– Not authorised
– Authorised
/
is only displayed if customer service is at-
tempting to connect to the hob. You can end this at any
time after granting access.
/
WiFi signal strength
– Not connected to home network
(WiFi)
– Signal strength 1 (weak)
– Signal strength 2 (moderate)
– Signal strength 3 (good)
/
is only displayed if there is a connection to
the WiFi.
/
Connection to the Home Connect
server
– Not connected
– Connected
/
is only displayed if there is a connection to
the WiFi.
1
Factory setting
25.5 Switching on WiFi
1.
Open the basic setting
.
2.
Touch repeatedly until the and
settings
flash alternately.
a
lights up.
3.
Set the value to
using the twist knob.
a
lights up.
a
WiFi is activated.
25.6 Switching off WiFi
Notes
¡
If WiFi has been activated, you can use the
Home Connect function.
¡
In networked standby mode, your appliance re-
quires a maximum of 2 W.
1.
Open the basic setting
.
2.
Touch repeatedly until the and
settings
flash alternately.
a
lights up.
3.
Set the value to
using the twist knob.
a
goes out on the control panel.
a
WiFi is deactivated.
Note:
The network settings are saved. When the WiFi
function is reactivated, the hob starts searching for a
connection to the saved network.
25.7 Disconnecting from the network
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is
not possible to operate it using Home Connect.
1.
Open the basic setting
.
