en
Operating modes
10
Switching between the settings area for
the hob and the ventilation system/set-
ting the ventilation level/switching on in-
tensive mode, automatic start and the
intermittent function for the ventilation
system
Switching on the stopwatch
Setting the short-term timer
Confirming the Home Connect setting
Indicators/symbols
The displays show set values and functions.
Operating status
Cooking zone
-
Heat settings/fan settings
.
Intermediate levels for the heat settings
Cooking sensor function
Frying sensor function
Cooking timer
Booster function for pots/intensive
mode for ventilation
Booster function for pans
Keep warm function
/
Residual heat
Timer function
.
Stopwatch function
Display cleaning protection
Childproof lock
Flex function activated
Flex function deactivated
Transfer function
Ventilation system switched on
Intermittent function for the ventilation
system
Ventilation system automatic mode
Fan run-on
Odour filter saturation indicator
Home network
Touch fields and displays
When the hob is switched on, the symbols for the cur-
rently available touch fields light up white. The displays
for the selected functions light up orange.
Touch a symbol to activate the corresponding function.
An audible confirmation signal sounds.
¡
Keep the control panel clean and dry. Moisture re-
duces its effectiveness.
¡
Do not place any cookware near the displays or
touch fields. The electronics may overheat.
Cooking zones
You can find an overview of the different cooking zone activations here.
You can find more information on which items of cookware are suitable for induction cooking in "Induction cooking".
→
Symbol
Cooking zone type
Switching on
Single cooking zone
Use cookware of a suitable size.
Flexible cooking zone You can find more information in "Flexible cooking zone".
Residual heat indicator
The hob has a two-stage residual heat indicator for
each cooking zone. This indicates that a cooking zone
is still hot. Do not touch the cooking zone if the resid-
ual heat indicator is lit.
The following is displayed depending on the amount of
residual heat:
¡
display: High temperature
¡
display: Low temperature
If you remove the cookware from the cooking zone dur-
ing cooking, the residual heat indicator and the selec-
ted heat setting flash alternately.
If you switch off the cooking zone, the residual heat in-
dicator lights up. Even if the hob has already been
switched off, the residual heat indicator remains lit for
as long as the cooking zone remains warm.
Operating modes
7 Operating modes
You can use your appliance in air extraction mode or
circulating-air mode.
7.1 Air extraction mode
The air which is drawn in is cleaned by the grease fil-
ters and conveyed to the exterior by a pipe system.
