Gaggenau BS 470 612, Use And Care Manual

Page: 44 / 68

44
en-us
Cleaning and maintenance
NOTICE
– Risk of damage to the appliance : Limescale may
damage the appliance. Descale the appliance
regularly.
– Risk of damage to the appliance: Using the wrong
descaler may damage the appliance. Only use the
specified descaling tablets.
– Risk of damage to the oven cavity: Use the descaling
tablet for the descaling program only. Place the
descaling tablet into the tank. Never place the
descaling tablet in the oven cavity or heat it up in
the oven cavity.
Note:
▯
Remove all accessories from the oven cavity before
starting the descaling program (wire rack, cooking
containers, core temperature probe).
▯
The drain filter must remain inserted in the oven cavity
floor while the descaling program is in progress.
▯
Always allow the descaling program to run to the end.
The descaling program cannot be cancelled.
▯
Depending on the water type and your use of the
appliance, descaling may still be required even if you
use the water descaling system (optional accessory
GF 111 100). A message appears in the display to
remind you of this.
Starting the descaling program
1.
Set the function selector to S . Use the rotary selector
to select the descaling program.
2.
The
‘
is displayed. Press
™
to confirm.
3.
The switch-off time at which the descaling program
will end is displayed. If required, you can alter the
switch-off time using the rotary selector. Press
™
to
confirm.
4.
Remove all accessories from the oven cavity. Press
™
to confirm.
5.
Remove the descaling tablet from the plastic
packaging.
9
WARNING
Risk of Injury!
Descaling tablets may cause chemical burns in
the mouth, throat and eyes; they may also cause
asphyxiation. Keep children away from
descaling tablets.
NOTICE
Using the wrong descaler may damage the appliance.
Only use the specified descaling tablets.
6.
Remove the tank from the appliance and take off the
lid.
7.
Place the descaling tablet in the compartment at the
back of the tank. Fill the tank with water up to the
"Max." mark (3.5 pints / 1.7 liters).
8.
Position the lid on the tank and click it into place.
9.
Slide the tank into the appliance.
10.
Close the appliance door. Press
™
to confirm. A
descaling time of 1 hour 45 minutes is displayed.
11.
Press
I
to start. The descaling time will count down on
the display. The light in the oven cavity remains
switched off.
Note: After approx. 1:30 hours, a message appears in
the display. Remove and empty the tank. Fill the water
tank with fresh water. Slide the tank into the
appliance. Confirm by pressing
™
. Press
I
to start the
rinsing process.
Drying the oven cavity
Dry the oven cavity after descaling using the drying
program. Remove the water tank and dry it with a soft
cloth.
O
0D[
0D
[
/