20
Basic settings
Your appliance can be individually adjusted in the basic
settings.
1
Turn the function selector to
S
.
2
Select "Basic settings" using the rotary selector.
3
Touch the
™
symbol.
4
Turn the rotary selector to select the required basic
setting.
5
Touch the
%
symbol.
6
Set the basic setting using the rotary selector.
7
Save with
™
or cancel with
'
and exit the current
basic setting.
8
Turn the function selector to
0
to exit the basic
settings menu.
The changes are saved.
Basic setting
Permitted settings
Explanation
Brightness
Level 1, 2, 3, 4, 5*, 6, 7, 8
Sets the display brightness
Standby screen
On*/Off
- Clock
- Clock + GAGGENAU logo*
- Date
- Date + GAGGENAU logo
- Clock + date
- Clock + date + GAGGENAU logo
Appearance of the standby screen.
Off: No display. Use this setting to reduce
the standby consumption of your appliance.
On: Several displays can be set, confirm
"On" with
™
and use the rotary selector to
select the desired display.
The selection is displayed.
Display
Reduced*/Standard
If the 'Reduced' setting has been selected,
only the most important information will be
shown on the display after a short time.
Touch field colour
Grey* / White
Selects the colour of the symbols on the
touch fields
Touch field tone
Tone 1* / Tone 2 / Off
Selects an audible signal for when a touch
field is touched
Touch field tone vol-
ume
Level 1, 2, 3, 4, 5*, 6, 7, 8
Sets the volume of the touch field tone
Heating-up time/audi-
ble signal
Heating up with audible signal
Rapid heat-up with audible signal*
Heating up without audible signal
Rapid heat-up without audible signal
With the heating-up function, the audible
signal sounds when the desired
temperature is reached. With the "Rapid
heat-up" function, the desired temperature
is reached particularly quickly.
Signal volume
Level 1, 2, 3, 4, 5*, 6, 7, 8
Sets the volume of the audible signal
Time format
AM/PM / 24 h*
Display the clock in 24 or 12
hour format
Time
Current time
Setting the clock
Clock change
Manual* / Automatic
Automatically changes the clock to
daylight-savings time. If automatic: Setting
the month, day and week for when the time
should be changed over. To be set for both
summer and winter time.
Date format
D.M.Y*
D/M/Y
M/D/Y
Sets the date format
