13
Activating the appliance
Standby
The appliance goes into standby mode if no function
has been set or the child lock is activated.
The brightness of the control panel is dimmed in
standby mode.
Notes
‒
Different displays are available for standby mode.
The default setting is the GAGGENAU logo and
the clock. To change the display, refer to the
Basic
settings
section.
‒
The brightness of the display depends on the
vertical viewing angle. You can adjust the display
using the "Brightness" setting in the basic
settings.
Activating the appliance
To exit standby mode, you can either
▯
Turn the function selector,
▯
Touch a control panel,
▯
Open or close the door.
You can now set the desired function. You can read
about how to set functions in the respective chapters.
Notes
‒
When "Standby screen = off" is selected in the
basic settings, you must turn the function selector
to exit standby mode.
‒
The appliance returns to the standby screen if you
have not made any settings for a long time after
activation.
‒
When the door is open, the interior lighting
switches off after a short time.
Operating the appliance
Cooking compartment
The cooking compartment has four shelf positions.
The shelf positions are counted from the bottom up.
Caution!
–
Do not place anything on the cooking
compartment floor. Do not cover it with aluminium
foil. A build-up of heat could damage the
appliance.
–
Do not slide any accessories between the shelf
positions, or they may tip.
Inserting accessories
The accessories are equipped with a locking function.
The locking function prevents the accessories from
tilting when they are pulled out. The accessories must
be inserted into the cooking compartment correctly
for the tilt protection to work properly.
When inserting the wire rack, check
▯
that the lug (a) is pointing downwards
▯
that the safety bar on the wire rack is at the back
and facing upwards.
D
D