Gaggenau BMP 224/225, Instruction Manual

Page: 20 / 36

20
Starting recipes
1 Set the function selector to the desired type of
heating.
The
i
symbol is displayed.
2 Touch the
i
symbol and select "Individual recipes"
using the rotary selector.
3 Confirm with
™
.
4 Use the rotary selector to select the desired recipe.
5 Press
I
to start.
Operation starts. The cooking time starts counting
down in the display.
The settings for each phase are shown in the
display.
Note: You can use the rotary selector to change the grill
setting for the full surface grill and the cooking time for
a microwave output while the recipe is in progress. This
does not change the saved recipe.
Change recipe
You can change the settings of a recorded or
programmed recipe.
1 Turn the function selector to any type of heating.
The
i
symbol is displayed.
2 Touch the
i
symbol and use the rotary selector to
select "Individual recipes".
3 Touch
™
to confirm.
4 Use the rotary selector to select the desired recipe.
5 Touch the
%
symbol.
6 Use the
C
symbol to select the required phase.
The settings are displayed. You can use the rotary
selector or function selector to change the settings.
7 Touch
™
to save.
- or -
Touch
'
to cancel and exit the menu.
Deleting recipes
1 Set the function selector to a desired type of
heating.
The
i
symbol is displayed.
2 Touch the
i
symbol. Select "Individual recipes"
using the rotary selector.
3 Confirm with
™
.
4 Use the rotary selector to select the desired recipe.
5 Delete the recipe with
Ž
.
6 Confirm with
™
.
Timer functions
You use the timer menu to make the following settings:
Š
Short-term timer
p
Stopwatch
Calling up the timer menu
The appliance must be on and the function selector
must be at
0 or
ž
.
Touch the
M
symbol.
The "Timer" menu is displayed.
Notes
‒ If you turn the function selector to a heating
function or
S "Basic settings" while the timer or the
stopwatch are running, a message will appear in the
display. Confirm the message by pressing the
™
symbol, and pause the timer or stopwatch. The
appliance is ready for operation.
To continue operating the timer or stopwatch, turn
the function selector back to the zero setting
0
or
ž
"Light".
‒ The timer and the stopwatch can be operated at the
same time.
When the function selector is at the zero setting 0,
only the timer is displayed.
In the
ž
"Light" setting, the timer and stopwatch
are displayed.