Gaggenau BMP 224/225, Instruction Manual

Page: 14 / 36

14
Sequential operation
With sequential operation, you can set up to five
different microwave output settings and grill settings
with cooking times to run one after the other.
Setting sequential operations
1 Set the required microwave output or the full
surface grill using the function selector.
2 Touch the
h
symbol.
The sequential operation menu is displayed.
3 Use the rotary selector to set the required cooking
time or grill setting.
4 Use
C
to select the second phase.
5 Set the required microwave output or the full
surface grill using the function selector. Use the
rotary selector to set the required cooking time or
grill setting.
Note: You can set a stabilisation time between two
microwave outputs so that the temperature is
distributed evenly within the food. To do this, touch
the
6
symbol and set a time using the rotary
selector.
6 Use
C
to select the third phase.
7 Set the required microwave output or the full
surface grill using the function selector. Use the
rotary selector to set the required cooking time or
grill setting.
8 Use
C
to select the
6
"Cooking time" function.
9 Turn the rotary selector to set the required cooking
time.
10 Confirm with
™
.
The main menu for sequential operation is
displayed. The settings for each phase are shown in
the display.
11 Press
I
to start.
The operation begins. The cooking time starts
counting down.
Once the cooking time has elapsed, the appliance
switches off. An audible signal sounds. The signal stops
early if you touch the
™
symbol, open the appliance
door, or set the function selector to 0 . The sequential
operation has finished.
Changing the settings of the current phase :
Touch the
H
symbol. The operation stops. Touch the
h
symbol and change the settings. Use the
™
symbol to
exit the menu. Press
I
to start.
Deleting the settings:
Touch the
'
symbol.
)XOOVXUIDFHJULOO