Gaggenau BMP 224/225, Instruction Manual

Page: 10 / 36

10
6 Confirm with
™
.
Ending initial set-up
"Initial set-up complete" appears in the display.
Confirm with
™
.
The appliance enters standby mode and the standby
screen appears. The appliance is now ready for
operation.
Heating up the cooking compartment
Ensure that no packaging has been left in the cooking
compartment.
To remove the new appliance smell, heat up the cooking
compartment when it is empty and with the oven door
closed. 30 minutes with
Q
full surface grill at setting 3
is ideal for this. For instructions on how to set this
heating function, refer to the
Full surface grill
section.
Cleaning accessories
Before using the accessories for the first time, clean
them thoroughly using hot detergent solution and a soft
cloth.
Activating the appliance
Standby
The appliance goes into standby mode if no function
has been set or the child lock is activated.
The brightness of the control panel is dimmed in
standby mode.
Notes
‒ Different displays are available for standby mode.
The default setting is the GAGGENAU logo and the
clock. To change the display, refer to the
Basic
settings
section.
‒ The brightness of the display depends on the
vertical viewing angle. You can adjust the display
using the "Brightness" setting in the basic settings.
Activating the appliance
To exit standby mode, you can either
▯
Turn the function selector,
▯
Touch a control panel,
▯
Open or close the door.
You can now set the desired function. You can read
about how to set functions in the respective chapters.
Notes
‒ When "Standby screen = off" is selected in the
basic settings, you must turn the function selector
to exit standby mode.
‒ The appliance returns to the standby screen if you
have not made any settings for a long time after
activation.
‒ When the door is open, the interior lighting
switches off after a short time.
'DWH
,QLWLDOVHWXS
FRPSOHWH