en
Troubleshooting
24
3.
Undo the screw from the bulb cover on the left-
hand, outer side wall and remove the bulb cover.
4.
Pull out the halogen bulb.
5.
Insert the new halogen bulb.
6.
Screw the lamp cover in place.
7.
Install the appliance.
‒
Carefully slide in the appliance.
‒
Tighten the fastening screws on the right and left-
hand side of the oven.
‒
Close the appliance door.
8.
Connect the appliance to the power supply.
19.13 Replacing the glass cover
If the glass cover in the cooking compartment is dam-
aged, it must be replaced.
Note:
Suitable glass covers are available from cus-
tomer service.
Requirements
¡
The cooking compartment has cooled down.
¡
The new glass cover to replace the old one is avail-
able.
1.
Undo the screw from the glass cover.
2.
Screw in the new glass cover.
20
Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
20.1 Malfunctions
Fault
Cause and troubleshooting
The appliance is not working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
