AFR200 Series, Product User Guide
This document is subject to change without notice.
Caution: None of GAC products are flight certified controls including this item
Copyright © 2010, Governors America Corp., All Rights Reserved
47
PUG4144 D
12 Specifications
PERFORMANCE
ENVIRONMENTAL
Isochronous Operation /
Steady- State Stability
+/- 0.25%
Ambient Operating
Temperature Range
-40° to + 85° C
[-40° to + 185° F]
Speed Range / Governor
400-10kHz (Mag Pickup)
Speed Drift with
Temperature
<+/- 1% Max
Relative Humidity
Up to 95%
Idle Adjust
Full Range
RELIABILITY
Shock
20G Peak Acceleration
Adjustable Droop Range
1-17% Regulation
Vibration
7G @ 20-2000Hz
Speed Trim Range
+/- 5% of Rated Speed
Testing
100% Functionally Tested
INPUT / OUTPUT PARAMETERS
CONFIGURATION PARAMETERS
Supply
12-24 VDC Battery Systems
(6.5 to 33VDC)
Flywheel Teeth
50-250
Polarity
Negative Ground (Case
Isolated)
Gain/Stability Multiplier
1-100%
Power Consumption
100mA Max. Continuous
plus Actuator, Stepper,
Heater, and MIL
Fixed Speed Settings*
0-maxRPM
Speed Sensor Signal
0.5-120 VRMS
Variable Speed Settings*
0-maxRPM
Actuator Current
Up to 6 Amps Continuous
Overspeed Settings*
0-maxRPM
Auxiliary (Load
Share/Synchronizer) Input
0-10 VDC
Starting Fuel
0-maxFuel
Manifold Absolute Pressure
(MAP) Sensor Input
0-5 VDC
Oxygen Setpoint
0-999mV
Coolant Temperature Input
Resistive 0-450 Ohm
Fuel (Gain / Stability Multiplier)
0-100
Oil Pressure Input
Resistive 0-250 Ohm
Full Value Setpoint
0-240 Steps
(0-100%)
Oxygen Sensor
0-1 VDC
Manifold Absolute Pressure
(MAP) Sensor
1,2 or 3 Bar
Oxygen Sensor Heater, MIL
0-2 Amps High Side
Sourced
*Maximum RPM is based on the Flywheel Teeth. RPM = Frequency x 60 / Flywheel Teeth. Maximum Frequency
is 10,000 Hz.
